Stocky's® Accublock® Euro SuperMatch™ Fully Adjustable Laminated Stock - Remington 700™ BDL Short Action Timber With Aluminum Bedding Block

Be the first to review this product

This is the breathtaking laminated wood fully adjustable - the SuperMatch™ Full Adjust Accubock® stock is for the Remington 700 short action BDL. One size fits sporters, magnums and varmints.

This was a sample stock so that is why it is being discounted. 

Genuine Old World craftsmanship with Stocky's® latest innovations in vertical-grip design and drop-in accuracy.... and they weigh less than many comparable composites!

Weatherby®, Montana Rifle, Kreighoff®, Benelli®, Merkel® and Beretta® are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's® is exclusively bringing them to the American aftermarket.

All EuroStocks™ feature full OEM-quality fit and finish, stippled laser-engraved checkering on the fore and grip and a nice, 1" thick, vented recoil pad. We supply them complete with our hardened, mil-spec takedown screws, washers and all the allen wrenches to adjust them.



Sign up for price alert
Sale: $499.99



This is the breathtaking laminated wood fully adjustable - the SuperMatch™ Full Adjust Accubock® stock is for the Remington 700 short action BDL. It is inlet for the varmint contour barrel.

This was a sample stock so that is why it is being discounted. 

Several years ago we were approached by Europe's largest manufacturer of fine OEM (factory) wooden stocks - laminates, walnut and even maple - to be their exclusive aftermarket distributor in the U.S.A.. These folks make everything from simple military stocks to the finest exhibition-grade walnut stocks in the world. Beretta®, Krieghoff®, Blaser®, Weatherby®, Benelli®, Merkel® - the finest sporting arms in the world, many selling well into the 5-figure range, are stocked with their stocks.

SuperMatch™ specifications:

  • Nominal Weight - 3 lb 12 oz
  • Length Overall - 32"
  • Length Of Pull - 13.5" to 14.25" (adjustable)
  • Forend Width - 2 3/8"
  • Cheek Rise - up to 1"
  • Barrel Channel - Varmint/Sendero (fits sporters, too.)
  • Cheek height adjustable for scoped rifles in low, medium or high rings.
Buttpad Adjustment Range - 
LOP: 12" (removed) 13.5" (closed) 14.25" (extended)
Vertical Range: + or - 1"
Horizontal - Cast off or on 1/2" from center
Also included -There's nothing more frustrating than getting your new stock in and not having the right stuff for use so we've identified and included everything you need to just drop your stock in and go shooting:
  • Hardened steel allen-head takedown screws.
  • 3/16" allen - rear buttpad
  • 5/32" allen - for the takedown screws, LOP and cheek adjustment
  • 3/32" allen - pad swivels sideways for cast off / on (side to side) adjustment
  • 3mm allen - for the innermost pad-to-plate attachment screws (only to keep them tight if necessary)

Making Adjustments

  • Cheek and LOP changes - insert 5/32" allen into small holes on RH side of buttstock (counterclockwise loosens.) Slide part into position and retighten.
  • Vertical Buttpad Adjustment - loosen the rear pad screw (3/16"), move up or down to suit, retighten in place
  • For Cast Adjustment - remove the main pad screw (3/16") to access the (chrome) cast adjustment screws. Position as desired, tighten screws to lock, replace pad.
  • Next to the chrome cast screws notice two deeply recessed black (3mm socket head) screws attaching the assembly to the aluminum backplate, make them snug and forget.

The overall silhouette design started with our domestic Long Range Target Accublock®, but we wanted to do something really special considering their pedigree. So we added a subtle style to the comb, stippled laser engraving on the grip and forend, but where we really departed from convention lies in the forend. Look closely and you'll see our trademark "swoosh" at the rear of forend gripping area (like the M50 Accubock®), but instead of leaving the top (barrel) flats thick and chunky like most manufacturers would, we tapered it gracefully up to the top flats embracing the Rem Varmint - Sendero barrel channel. Same with the forend tip.

Striking good-looks aside, what this accomplishes is also unique to the industry, a one-size-looks-great free float for any barrel from the Standard Sporters, through the heavier Magnum Sporters (shown: right), Senderos and 700 Varmint barreled rifles. One thing that surprised me when we brought out the Long Range Target Accublock® stock more than a decade ago was how many shooters used them for their sporters, so we made it work a lot better this time. Virtually any 700 barrel up to varmint will look and perform great, including the PROOF Research Sendero Lite tapers. 

Bottom metal-wise of course standard BDL hardware works great, but we also made sure these stocks would work well with (my favorite) the H-S Precision DM system. If you are building a custom rifle, check them out.

One more note: since wooden stocks use the screw-in type swivel studs, we recommend epoxying the studs in for heavy use, especially the bipod stud.


Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.