Stocky's® Accublock® Euro SuperMatch™ Fully Adjustable Laminated Stock - Remington 700™ BDL With Aluminum Bedding Block

Several years ago we were approached by Europe's largest manufacturer of fine OEM (factory) wooden stocks - laminates, walnut and even maple - to be their exclusive aftermarket distributor in the U.S.A.. These folks make everything from simple military stocks to the finest exhibition-grade walnut stocks in the world. Beretta®, Krieghoff®, Blaser®, Weatherby®, Benelli®, Merkel® - the finest sporting arms in the world, many selling well into the 5-figure range, are stocked with their stocks.

They explained to us that although they have been supplying these stocks to European and American manufacturers since 1937, they have never done anything in the aftermarket. We knew you guys and gals would want some of the finest stocks in the world so Stocky's® EuroStock™ Accublock® 700 was born soon thereafter.

We've designed 3 new Euro 700's - 

1. EuroTarget™ - conventional fixed;
2. EuroMatch™ - adjustable comb;
3. SuperMatch™ - fully adjustable

They come in your choice of beautiful laminated colors. (See other category pages for the other models.)

SuperMatch™ specifications:

• Nominal Weight - 3 lb 12 oz
• Length Overall - 32"
• Length Of Pull - 13.5" to 14.25" (adjustable)
• Forend Width - 2 3/8"
• Cheek Rise - up to 1"
• Barrel Channel - Varmint/Sendero (fits sporters, too.)
• Cheek height adjustable for scoped rifles in low, medium or high rings.

• Hardened steel allen-head takedown screws.

Making Adjustments

• Cheek and LOP changes - insert 5/32" allen into small holes on RH side of buttstock (counterclockwise loosens.) Slide part into position and retighten.
• Vertical Buttpad Adjustment - loosen the rear pad screw (3/16"), move up or down to suit, retighten in place
• For Cast Adjustment - remove the main pad screw (3/16") to access the (chrome) cast adjustment screws. Position as desired, tighten screws to lock, replace pad.
• Next to the chrome cast screws notice two deeply recessed black (3mm socket head) screws attaching the assembly to the aluminum backplate, make them snug and forget.

Stocky's® Take: The selection, fit and finish are exactly what you'd expect from a premium OEM supplier, simply outstanding. In fact I would venture to say these are the finest wooden production stocks in the world, certainly better than we've seen in a very long time - I'm thinking back to the old days. They're that nice.

The design of our Euro 700™ Accublocks® are unique to the industry. The blocks are machined in place so you can be assured of a great fit every time. The laminated wood is the best in the world, you'll notice it right off in the color and clarity. The finish is fully the equal of the best factory rifles on the market, it is in fact the exact same OEM finish.

The overall silhouette design started with our domestic Long Range Target Accublock®, but we wanted to do something really special considering their pedigree. So we added a some subtle style to the comb, stippled laser engraving on the grip and forend, but where we really departed from convention lies in the forend. Look closely and you'll see our trademark "swoosh" at the rear of forend gripping area (like the M50 Accubock®), but instead of leaving the top (barrel) flats thick and chunky like most manufacturers would, we tapered it gracefully up to the top flats embracing the Rem Varmint - Sendero barrel channel. Same with the forend tip.

Striking good-looks aside, what this accomplishes is also unique to the industry, a one-size-looks-great free float for any barrel from the Standard Sporters, through the heavier Magnum Sporters (shown: right), Senderos and 700 Varmint barreled rifles. One thing that surprized me when we brought out the Long Range Target Accublock® stock more than a decade ago was how many shooters used them for their sporters, so we made it work a lot better this time. Virtually any 700 barrel up to varmint will look and perform great, including the PROOF Research® Sendero Lite tapers. 

Bottom metal-wise of course standard BDL hardware works great, but we also made sure these stocks would work well with (my favorite) the H-S Precision DM system. If you are building a custom check them out.

One more note: since wooden stocks use the screw-in type swivel studs, we recommend epoxying the studs in for heavy use, especially the bipod stud.