Intended Use

Every once in a while our friends at Remington’s Gunstock Division give us a call to see if Stocky’s would like to do a special run of factory wood profile Model 700™ stocks in the laminated colors we made famous back with them back in the 2000’s. 

 Remember the Stocky’s® / S&K Gunstock days? Many of the same folks but now made by Remington exclusively for Remington factory rifles and Stocky's®..

 These are the model 700™ CDL style stocks and they are absolutely gorgeous. These stocks are / will be available in LA or SA with Sporter or Magnum barrel channels.

These fit all 700's with hinged floorplates and sporter barrels. In other words, you can put your BDL or SPS in a CDL stock interchangeably.

Our latest Long Range AccuBlock® M50 is designed to be a tack-driving, full size target / varmint stock  - comes complete with 3 swivel studs, vented forend to promote faster barrel cooling and a fitted Pachmayr Decelerator recoil pad. It is identical in form to our ground-breaking M50 carbon fiber layup stocks, with the warmth and beauty of wood. For pure shootability it is a hard stock to beat at any price.

Stocky's Take: This stock design is rapidly becoming one of my favorite ambedextrous designs of all time for several reasons.

• The butt is tall and wide so the apparent recoil reduction is as good or better than any laminated stock on the market today. 
• The cheek is as high as I dared to make it while still clearing the bolt, without putting a groove in the front to ruin its more classic lines. 
• The grip is more vertical than older versions (like the M40), the palm swell puts the trigger finger right where it needs to be for optimum trigger control, with a thumb flute on either side. 
• The receiver sits nestled in our precisely accurate, aluminum Accublock® and needs no bedding (skim bedding is okay for the most particular shooters). 
• The semi-beavertail forend (as well as the flat-bottom butt) rides great in the bags and is plenty wide enough, but not as wide as some. 
• Up front we've cut a pair of air breathing vents as well as undercut the inside of the barrel channel to promote maximum barrel cooling during those long, hot days in dog town. 

We're pretty sure you'll agree its one of the most inherently accurate, sweetest shooting stocks out there! 

Tired of the same-old painted riflestocks? Once again Stocky's is bringing you to the forefront of modern stockmaking technology with these Iota exclusives! Our new Iota lineup features molded-in colors, hand layup fiberglass / carbon fiber construction, barrel channels up to and including the Proof Sendero (M24) and the standard inlets are designed fit both factory Rem 700 receivers as well as the modern crop of 700 clones (e.g. Defiance, Big Horn, Stiller).

The iota KREMLIN is a composite rifle stock that combines key features from both hunting and target stock designs, including a widened but trim beavertail forend, a vertical grip with ambidextrous palm swell, and a rigid butt stock that still maintains the typical weight of a hunter stock. This hand layup composite stock is reinforced with a carbon fiber core for superior strength in a lightweight build, and then completed with a unique selection from our variety of molded in color schemes.

Definitely not your average gunstock... scroll for complete specifications.

Tired of the same-old painted riflestocks? Once again Stocky's is bringing you to the forefront of modern stockmaking technology with these Iota exclusives! Our new Iota lineup features molded-in colors, hand layup fiberglass / carbon fiber construction, barrel channels up to and including the Proof Sendero (M24) and the standard inlets are designed fit both factory Rem 700 receivers as well as the modern crop of 700 clones (e.g. Defiance, Big Horn, Stiller).

Focusing on mobility, the iota KRUX is iota's lightweight sporter style stock featuring a hand layup skeletonized body and compact size. Perfect for backcountry builds with Proof Research (as well as varmint and light sporter barrels).

The iota KRUX is engineered unlike any other stock currently on the market. The lightweight sporter style stock’s skeletonized back end provides a unique design style while reducing overall weight which helps land this stock at only 27 ounces. The grip is less canted than a traditional stock providing shooter comfort and the thumb recesses encourage a correct grip for both right and left handed shooters. The barrel channel can accommodate more contour options than the traditional sporter stock including a Proof Sendero barrel contour, the pre-installed pillars help maintain accuracy focused structure, and the molded in ports avoid refinishing touch-ups.

Stocky's knows thumbholes!

Stocky has been doing thumbholes for over 12 years now and I have to say our new LRC™ Thumbholes are among the best, most comfortable and most accurate ever. In fact, our entire LRC™ line-up is known for being among the most accurate, best shooting stocks on the maket today, and the new LRC™ Thumbhole is certainly no exception, especially in light of our extensive, decade+ experience with thumbholes!

Please do not confuse new Long Range Composite Stock with the cheap, flimsy polypropylene stocks on off-the-shelf factory composites like the 700 SPS. These are constructed from the stiffest, most durable 40% fiberglass filled composite we could find, much like your Glock frame, with our famous aluminum Accublock® molded right into the stock from the start.

Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever. Well under 2 lbs!

 Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest carbon fiber stockmaking facility in America, took us more than a year to put together but we finally accomplished it. You can be sure our new CF lineup is formulated with the best-of-the-best American Technology, indeed the world, has to offer.

Tired of the same-old painted riflestocks? Once again Stocky's is bringing you to the forefront of modern stockmaking technology with our own exclusives! Designed for long range shooting, Stocky's M50™ is an outstanding hunting, target or tactical stock.  The New M50-FG™ features hand-layup construction, a carbon fiber core with a durable and attractive gelcoat finish - impervious to solvents and cleans-up with soap & water. 

 Our new FG lineup features molded-in colors, barrel channels up to and including the Proof Sendero (M24) and the standard inlets are designed fit both factory Rem 700 receivers as well as the modern crop of 700 clones (e.g. Defiance, Big Horn, Stiller).

This version is ergonomically identical to the injection-molded version, the LRC M50. Unlike the previous carbon fiber version we did, this new M50-FG™ ("FG" stands for fiberglass) sports the same high cheekrest as the LRC™ version, slightly lowered at the front for clearing and removing the cartridge bolt safely.

It is constructed of hand-laid layers of premium fiberglass cloth reinforced with a carbon fiber core for superior strength in a lightweight build, and then completed with a unique selection from our variety of molded in color schemes. Despite the rather large size, it still weighs just over 2 lbs. with a hand-fitted Pachmayr Decelerator™ pad.

Once again Stocky's is bringing you to the forefront of modern stockmaking technology with our own exclusives! Our new FG lineup features molded-in colors, hand layup fiberglass / carbon fiber construction, barrel channels up to and including the Proof Sendero (M24) and the standard inlets are designed fit both factory Rem 700 receivers as well as the modern crop of 700 clones (e.g. Defiance, Big Horn, etc.).

The fast-handling Long Range Hunter™ (LRH™) model features classic, ambedextrous styling that is at home in the mountains, on the range or in the timber.

It is constructed of hand-laid layers of premium fiberglass cloth reinforced with a carbon fiber core for superior strength in a lightweight build, and then completed with a unique selection from our variety of molded in color schemes. It weighs just under 2 lbs..

These fit all 700 Varmint, Sendero and Police rifles with hinged floorplates right out of the box. The butt of the stocks are identical to the standard Remington 700 BDL wood stocks, complete with the signature black grip cap. The forend, however, has been widened to a full beavertail for resting in bags or on bipods.

These are the only factory 700 wood stocks that will accept the heavier barrels and may be opened up to full bull or M24 / Proof if desired. If you want to ditch the synthetic and carry a truly legendary 700 varmint rifle, this is the one to choose. You can bolt them up and shoot right our of the box, or they are easily bedded with our pillar bedding kits. They are wonderful upgrades to refresh any suitably-barreled 700 or would make a great classical custom 700 with an H-S Precision (listed below) or other premium aftermarket varmint barrel.

Stocky's Take: Truth be told, these are the original M700 varmint / tactical style of stocks, having been popular back in the days you couldn't give a synthetic-stocked rifle away. If I had to choose my favorite wood stock of all time, this would be it. The SA walnut version should be arriving very soon, long action version(s) are on order but we don't have a date on them yet.

Every once in a while our friends at Remington’s Gunstock Division give us a call to see if Stocky’s would like to do a special run of factory wood profile Model 700™ stocks in the laminated colors we made famous back with them back in the 2000’s. Remember the Stocky’s® / S&K Gunstock days? Many of the same folks but now made by Remington. These are the original 700™ BDL Monte Carlo style stocks and they are absolutely gorgeous.

These stocks are / will be available in LA or SA in Standard Sporter or Magnum configurations. Standard sporter stocks have the Remington original hard butt plate. Stocks designed for Magnum cartridges have the new SuperCel™ pads, a magnum barrel channel and an added reinforcement dowel.

These fit all 700's with hinged floorplates. In other words, you can put your CDL or SPS in a BDL stock interchangeably.

The LRC™ Sporter is a fast-handling and compact classic style stock. It also weighs about 25% less than its sister models!

Please do not confuse new Long Range Composite Stocks with the cheap, flimsy polypropylene stocks on off-the-shelf factory composites like the 700 SPS. These are constructed from a proprietary, custom blended, high-fiber composite to create the stiffest, most durable unit we could make with acceptable weight, and our famous aluminum Accublock® chassis is molded right into the stock from the start.

Old World Craftsmanship comes to the USA!

This is the breathtaking laminated wood version our EuroMatch™ 10/22® stocks, adjustable cheek version, available in your choice of colors. 

The cheekpiece on these stocks is not simply a chunk cut out of the buttstock like most stocks, its actually a well-designed, form-fitting "cap" that slides up and down and locks in place - no buttons to break or springs to clog - the way it should be engineered.

All EuroStocks™ feature full OEM-quality fit and finish, stippled laser-engraved checkering on the fore and grip and a nice, 1" thick, vented recoil pad. 

Please refer to the full description for specifications.

Please do not confuse new Long Range Composite Stocks with the cheap, flimsy polypropylene stocks on off-the-shelf factory composites like the 700 SPS. These are constructed from a proprietary, custom blended, high-fiber composite to create the stiffest, most durable unit we could make with acceptable weight, and our famous aluminum Accublock® chassis is molded right into the stock from the start.

The M50 was designed to be my personal long range target and hunting stock. A close inspection will reveal the grip is very similar to the SAKO series, palm swell and all, except done in an ambidextrous manner. I've used this grip hunting all over the world so I'll personally vouch for it. We also widened the forend very slightly and added two snap-in / bolt-on combs. The M50 uses the identical Stocky’s KickSoft™ Recoil Pad as the LRC™.

The  (matching color) High M50 cheekrest was put at the same height as the LRC™ and the X-High raises it another 5/8" (0.63"). I think you'll find the High cheek is perfect for scopes in low or medium rings and the X-High version is perfect for big, bad scopes in medium or high rings.

One other little thing, we include new takedown screws with your stock that are just the right length so you can be sure it will install in a snap!

We're now stocking some of the OEM (original equipment from the manufacturer) walnut stocks many modern reproductions use on their new rifles from an Italian supplier, Minelli. In case you don't know who Minelli is, they make approximately 600,000 stocks per year ranging from the military wood you see here to some of the fanciest wood factory stocks you can imagine for names like Weatherby, Beretta and Krieghoff to name a few. I believe they are the biggest stockmaker in the world.

They'd be great on any rifle, new or old! 

Italian manufactured military walnut stocks

• Faithful reproduction of original military stocks

• Built with great attention to detail, especially in the inletting

• Finished with an oil finish, replicating a traditional military stock finish

• Ready for fitment of metal hardware and installation, may require minor fitting

Genuine Old World craftsmanship with Stocky's latest innovations in vertical-grip design and drop-in accuracy.... and they weigh less than many comparable composites!

Weatherby, Montana Rifle, Kreighoff, Benelli, Merkel and Beretta are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's is exclusively bringing them to the American aftermarket.

This is the breathtaking laminated wood version our EuroTarget™ fixed 700 Accubock® stocks available in your choice of colors. One size fits sporters, magnums and varmints.

All EuroStocks™ feature full OEM-quality fit and finish, stippled laser-engraved checkering on the fore and grip and a nice, 1" thick, vented recoil pad. We supply them complete with our hardened, mil-spec takedown screws, washers and all the allen wrenches to adjust them.

Please refer to the full description for more info and specifications.

Genuine Old World craftsmanship with Stocky's latest innovations in vertical-grip design and drop-in accuracy.... and they weigh less than many comparable composites!

Weatherby®, Montana Rifle®, Kreighoff®, Benelli®, Merkel® and Beretta® are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's® is exclusively bringing them to the American aftermarket.

This is the breathtaking laminated wood version - our EuroMatch™ Adjustable 700 Accubock® stocks and are available in your choice of colors. One size fits sporters, magnums and varmints.

All EuroStocks™ feature full OEM-quality fit and finish, stippled laser-engraved checkering on the fore and grip and a nice, 1" thick, vented recoil pad. We supply them complete with our hardened, mil-spec takedown screws, washers and all the allen wrenches to adjust them.

Please refer to the full description for more info and specifications.

Genuine Old World craftsmanship with Stocky's® latest innovations in vertical-grip design and drop-in accuracy.... and they weigh less than many comparable composites!

Weatherby®, Montana Rifle, Kreighoff®, Benelli®, Merkel® and Beretta® are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's® is exclusively bringing them to the American aftermarket.

This is the breathtaking laminated wood fully adjustable - the SuperMatch™ Full Adjust Accubock® stock is available in your choice of colors. One size fits sporters, magnums and varmints.

All EuroStocks™ feature full OEM-quality fit and finish, stippled laser-engraved checkering on the fore and grip and a nice, 1" thick, vented recoil pad. We supply them complete with our hardened, mil-spec takedown screws, washers and all the allen wrenches to adjust them.

Please refer to the full description for more info and specifications.

The Howa HCR Chassis rifle is an exceptional factory build.

This is the chassis-only, purchased by Stocky's® directly from Howa's OEM supplier.

Any Howa 1500 or Weatherby® Vanguard® barreled action will drop right in and accept AICS magazines.

The grip is included.

Uses your mil-spec buffer tube and any appropriate AR buttstock you like.

We do sell the Mil-Spec buffer tubes as well as the AR Buttstocks here. 

Cooper Firearms of Montana builds some of the finest semi-custom and custom rifles in the USA, all with their own hand-fitted stocks. We are now making certain models available in limited production runs in handmade wood and fiberglass / kevlar / carbon fiber layup construction.

These synthetic stocks feature a hand laid fiberglass shell with Kevlar and carbon fiber reinforcement in high stress areas, resulting in an extremely strong yet lightweight riflestock for your classic builds.

They feature molded-in aluminum action screw pillars, a very appropriate 1” Pachmayr Old English Decelerator butt pad, and a 13-3/4” length of pull. A more vertical pistol-style grip, sculptured forend and deep reliefs behind the grip provide excellent comfort, trigger control and fast handling.

Precision inletting for factory Remington® hinged floorplate bottom metal and sport barrel contour allows for an exceptionally strong stock while maintaining a low 30-31oz weight.

FREE BEDDING KIT; THESE STOCKS ARE NOT DROP-INS AND ARE DESIGNED TO BE EPOXY BEDDED IN THE RECOIL LUG AREA. DO NOT FIRE BEFORE BEDDING.

See the full description for complete specifications.

Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever. Well under 2 lbs!

 Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest carbon fiber stockmaking facility in America, took us more than a year to put together but we finally accomplished it. You can be sure our new CF lineup is formulated with the best-of-the-best American Technology, indeed the world, has to offer.

Tired of the same-old painted riflestocks? Once again Stocky's is bringing you to the forefront of modern stockmaking technology with our own exclusives! Designed for long range shooting, Stocky's VG in all of its varieties is an outstanding hunting, target or tactical stock.  The Fiberglass Vertical Grip Thumbhole features hand-layup construction, a carbon fiber core with a durable and attractive gelcoat finish - impervious to solvents and cleans-up with soap & water. 

 Our new FG lineup features molded-in colors, barrel channels up to and including the Proof Sendero (M24) and the standard inlets are designed fit both factory Rem 700 receivers as well as the modern crop of 700 clones (e.g. Defiance, Big Horn, Stiller).

This version is ergonomically identical to the injection-molded version.

It is constructed of hand-laid layers of premium fiberglass cloth reinforced with a carbon fiber core for superior strength in a lightweight build, and then completed with a unique selection from our variety of molded in color schemes. Despite the rather large size, it still weighs just over 2 lbs. with a hand-fitted Pachmayr Decelerator™ pad.

Our new HOWA Hunter is a classically-styled Ultra Carbon hand laminated sporting riflestock. Weighing in at just 20-21 ounces (SA) and 22-23 ounces (LA) it is the lightest, handiest classic for the demanding Howa rifleman.

Nominal Specs:

O.A.L. 29.5”

L.O.P. 13.5”
Weight @600g
Recoil Reduction via SVL Limbsaver pad