The new Long Range Composite Stock is is the result of two years of research and development that was designed to accomplish several goals. First, we wanted to combine the best modern stock designs in the world into one “ultimate” model that would not only have the most inherent accuracy available, but also have the high comb needed to clear big scopes while still able to remove the bolt from the receiver. We also required the LRC™ to be durable, comfortable to shoot, easy to control and flexible enough to accommodate a wide range of barrels from hunting-weight sporters through the heaviest varminters. We accomplish this barrel interchangeability though the use of our patented forend inserts (pictured below # 2.2, 2.3). The stock may be used with either the narrow or wide insert, or without the insert at all. Although they do add stiffness to the forend when installed, the forend is plenty stiff without it. Therefore little outside of cosmetics and some dust proofing is accomplished by their use in this particular model. Your preference will be the guide here, bear in mind the more free float the faster your barrel will cool.
Please do not confuse new Long Range Composite Stock with the cheap, flimsy polypropylene stocks on off-the-shelf factory composites like the 700 SPS. These are constructed from the stiffest, most durable 40% fiberglass filled composite we could find, much like your Glock frame, with our famous aluminum Accublock® molded right into the stock from the start.
Cutting Edge Composite - not plastic: The composite material we use can easily be sanded, machined, modified, baked in an oven and otherwise finished as good or better than an epoxy based stock. We will be offering them not only in the base composite material as shown here, but have spent a great of deal of development effort into new finishing technology that we now offer in a variety of solid and spiderweb colors as well as camo and other patterns.
For these stocks we have developed a new KickSoft™ recoil pad. Our new pad is of a medium firmness, when shooting magnums it won’t collapse or make a firm shoulder hold shaky like a softer pad, nor is it as hard as some others that do little to absorb recoil. We think you’ll like it a lot, but if you want a different pad it'll unscrew and your gunsmith can fit the alternate of your choice.
The grip cap is made from the same material as the stock and forend, a special type of 40% glass-filled composite. I can see many of our more custom-minded customers having an identical cap machined out of a small piece of aluminum stock and engraved to taste.
These stocks don’t require bedding, however those who insist on using an epoxy bedding system in their rifles should only concern themselves with skim-bedding the aluminum AccuBlock® itself. Do not remove any of the composite material in the stock itself nor modify the block in any way.
Nominal Specs: length overall - 32"; forend width - 2"; weight 3.5 lbs.
- Your choice of a patented:
(2.2) Narrow Barrel Channel Insert (Sporter to Magnum barrels) OR
(2.3) Wide Barrel Channel Insert (Magnum to Varmint barrels)
- 10-32 x 5/8” Insert Screws (3)
- Grip Cap
- Grip Cap Screws (2)
- Stocky’s KickSoft™ Recoil Pad
- Recoil Pad Screws (#10 x 1” Phillips)
- Swivel Studs
- Swivel Stud Spacers
- (10.1) Rear Receiver Screw (10.2) Front Receiver Screws
- Mil Spec Floorplate Spacers
* Reference only, stocks shipped completely assembled.
US Design Patent Number D744,055
|Max Barrel Contour||No|
|Length of Pull||13.5"|
- LRC700 StockReview by Glenn
- This is the best stock you will find for this price.Review by Dennis
- Unreal deals don't happen often! Review by Todd
- Best stock I've ever ownedReview by John
- Great stock and unbelievably excellent service Review by Doug
- Excellent StockReview by Keelan
Today I was able to produce a 1/2 MOA group without having to glass bed the action. I was using match ammo and a bench, but the stock delivered the accuracy I was looking for at a great price.
There is one problem. If you are looking to switch the trigger guard (bottom metal) you will not be able to use the Oberndorf. It will not close securely at any point. The Traditional and Tactical Trigger Assemblies will work fine with this stock.
I highly suggest this stock to anyone looking to improve a factory Remington 700 or squeeze a little more out of it.
(Keelan, I don't know who's Oberndorf you were using but our in-house steel Oberndorf floor plate assembly fits fine - I just tried it. Thanks for the review! - Stocky)
(Posted on 5/1/2016)
- best buyReview by Lynn
- Amazing features for the priceReview by Tyler
- Stellar Stock ValueReview by Longunner
- Worth every cent!!!!!!!!Review by charles