Mounts and Rings

Mounts and Rings

14 Item(s)

per page

  • IOTA Outdoors ZEROlight

    ZEROlight is a revolutionary anti-cant device for precision long-range shooting that enables you to make critical scope turret adjustments and horizontal axis corrections, and achieve maximum accuracy in low-light and darkness situations with the click of a button.

    The ZeroLight is one of those truly precision products that you'll wonder how you ever got along without, ESPECIALLY on varmints and for PRS shooting... Put one on every long range rifle you own and you'll never be without it. Trust me on this, if you shoot at long ranges and occasionally in little or no light situations and / or from dark blinds, you won't know how you ever did without it.

     

    Learn More

    Starting at: $99.99

  • Iota Outdoors Nomad ZL Scope Mount with ZEROLight Technology

    No rust. No dust. NOMAD. Avoid the annoying repercussions of top-down screws with iota NOMAD ZL, a reinvented ring-base combo scope mounting system featuring under-angled screws and ZEROLIGHT technology.

    NOMAD ZL gives hunters and shooters the freedom to take the rings off and put them back on their rifle scope tube with ease whenever they need. With no rust and no dust, the NOMAD ZL’s revolutionary under-angled screw design reduces corrosion from the condensation and crud that collects in the sockets of the typical top-down screws seen on other scope rings in the market. And hey, it looks good, too -- By placing the screws on the underside of the ring, we opened up the top to display a smooth, sleek exterior design. To enhance your positioning accuracy and adjustment capabilities when using a scope system during conditions with low visibility, we incorporated our patent pending ZEROLIGHT technology in the rear ring of the NOMAD ZL. The NOMAD ZL is fabricated out of anodized Aluminum 6061-T6, an aircraft-grade aluminum alloy known for its superior strength, lightweight mass and corrosion resistance. Each ring utilizes four stainless steel socket head cap screws to facilitate an equal distribution of force for optimal solidity when mounting your rifle scope.

    The NOMAD ZL and NOMAD are available in both 30 mm and 34 mm sizes for Remington 700 and Savage Round applications.

    Learn More
    Sale: $179.99

  • Iota Outdoors Triad ZL Scope Mount with ZEROLight Technology

    Even the slightest inconsistency between a picatinny rail and ring pairing can impede the accuracy of your shot. Negate the tolerances allowed in your rail’s machining specifications with iota TRIAD ZL, a set of scope mounts featuring a patent pending three-key adjustment system and ZEROLIGHT technology.

    Equipped with our game-changing under-angled screw design, iota set out to solve the problems of the picatinny scope mount system. Our patent pending three-key adjustment system equips the TRIAD ZL with interchangeable key inserts for mounting scope rings to the rail within three different tolerances: +.0035, nominal, and -.0035. To further advance the stability and accuracy of the system, iota TRIAD ZL is machined with an exclusive under-cut wedge design that enables the rings to maintain a leveled position while mounted to the rail.

    We incorporated our patent pending ZEROLIGHT technology in the rear ring of the TRIAD ZL to enhance your positioning accuracy and adjustment capabilities when using a scope system during conditions with low visibility. The TRIAD ZL is fabricated out of anodized Aluminum 6061-T6, an aircraft-grade aluminum alloy known for its superior strength, lightweight mass and corrosion resistance. Each ring utilizes four socket head cap screws to facilitate an equal distribution of force for optimal solidity when mounting your rifle scope.

    Learn More
    Sale: $199.99

  • Hawke Match Ring Scope Mounts

    Precision Hawke rings fit Weaver and Picatinny bases, as well as models for .22 rimfire / air rifle that use a dovetail (fit 9mm, 3/8" and 11mm grooved receivers) ring and mount combos.

    • Double hex screws to hold your scope firmly in place 
    • Weaver version features crossbar for additional security 
    • Internal cushion tape prevents marking and damage 
    • High grade aluminum anodized in matte black

     

    Learn More

    Starting at: $16.99

  • Hawke Extension Ring Scope Mounts

    Extended rings - Move your scope an inch or two forward.

    Precision Hawke rings fit Weaver and Picatinny bases, as well as models for .22 rimfire / air rifle that use a dovetail (fit 9mm, 3/8" and 11mm grooved receivers) ring and mount combos. Use these when you need to mount it a bit farther forward, not a bad idea on any big scope.

    • Double hex screws to hold your scope firmly in place 
    • Weaver version features crossbar for additional security 
    • Internal cushion tape prevents marking and damage 
    • High grade aluminum anodized in matte black

     

    Learn More

    Starting at: $24.99

  • Sale: $21.99

    Special $19.99

  • Sale: $23.99

    Special $21.99

  • Sale: $24.99

    Special $22.99

  • Hawke Adapter Base 1 Piece 3/8" Rifle To Weaver Elevated

    Specifications:

    • 5.4″ / 137mm
    • 3.9oz / 110g


    Learn More

    Sale: $19.99

    Special $17.99

  • Hawke Adapter Base 1 Piece 3/8" Rifle To Weaver Extension

    Specifications:

    • 7.36″ / 187mm
    • 4.2oz / 119g


    Learn More

    Sale: $23.99

    Special $21.99

  • Hawke Adapter Base 1 Piece 3/8" Rifle To Weaver

    Specifications:
    • 3″ / 76mm
    • 0.9oz / 25g
    Learn More

    Sale: $27.99

    Special $24.99

  • Hawke Universal Weaver/Picatinny Base

    Specifications
    • 4.8″ / 122mm
    • 1.3oz / 37g
    • Supplied with mounting screws (American 8-40x¼")
    Learn More

    Sale: $11.99

    Special $10.99

  • JP Enterprises X-High Picatinny Rail Scope Mount for 1" and 30mm Scopes - AR-10/15

    The original one-piece JP Flat-Top Scope Mount attaches to any standard Picatinny rail and features an integrated recoil lug for stability. Ideal for AR applications, its intermediate height can accommodate up to a 56mm objective while the mount rings will fit any 30mm scope tube by default or any 1” scope tube when used with the included ring adapters.

    • Weight: 6.85 oz.
    • Height to centerline: 1.47" over rail
    • Approx. total height over rail: 2.70" (small-frame), 2.80" (most large-frame)
    • Attachment: 5x countersunk flat-head screws on clamp piece, 4x 6-32 cap screws on each ring strap (Torx keys included)
    Learn More
    Sale: $179.95

  • Iota Outdoors Triad Scope Mount

    Even the slightest inconsistency between a picatinny rail and ring pairing will impact the accuracy of your shot. Negate the tolerances allowed in your rail’s machining specifications with iota’s TRIAD, a set of scope mounts featuring a patent pending three-key adjustment system. 

    • Under-angled screw design eliminates corrosion from the condensation and crud that collects in the sockets of the typical top-down screws on other scope rings. 
    • Patent-pending three-key adjustment system equips the TRIAD with interchangeable key inserts for mounting scope rings to the rail within three different tolerances: +.0035, nominal, and -.0035. 
    • Machined with an exclusive under-cut wedge design that enables the rings to maintain a leveled position while mounted to the rail advancing the stability and accuracy of the system. 
    • Fabricated out of anodized Aluminum 6061-T6, an aircraft-grade aluminum alloy for superior strength, lightweight mass and corrosion resistance. 
    • Four socket head cap screws to ensure an equal distribution of force for optimal solidity when mounting your rifle scope. 
    • Built-in anti-cant to help you correct for inaccurate shot placement due to the canting of your rifle platform. 
    • Available in 30 mm (3 oz) or 34 mm (2.6 oz).
    Learn More
    Sale: $164.99

14 Item(s)

per page