Materials: • Woven Kevlar® cloth • Woven fiberglass cloth • Uni-directional carbon fiber • Epoxy-based gel coat and laminating resin • Reaction injection molded (machine mixed) polyurethane foam, fiberglass reinforced • Proprietary CNC machined aluminum bedding block chassis system, designed by H-S Precision • Non-reflective, non-slip baked-on polyurethane finish • Uncle Mike's sling swivel studs • Uncle Mike's Ultra-Mag recoil pad
Nominal Specs - Weight 2.0 pounds L.O.P. 13.5" O.A.L. 28.75 " Barrel Channel - Rem #3 .850" Muzzle 8.9" from recoil lug to tip
PSV063 - REM 7 BDL RIGHT HAND BOLT SLOT
Stocky's take: Solidly in the 'sporter/varmint' category this two-pounder sports a forend that is a slightly rounded triangle in cross section, wider at the bottom (1 7/8" at the stud), nearly flat but not quite. I wouldn't put a much thicker barrel in it as the flats at the forend tip measures an inch and a quarter. Plenty for the factory bulls or maybe open it a hair more if you are daring.
Thinner sporterized grip with no palm swell in keeping with the M7. For the shooter seeking a long-range walking varminter or fluted Sendaro-type big-game hunter this unit would be hard to beat. Has no equal if you are building a tackdriver with your Fireball or Short Action Ultra!
|Brand||H-S Precision Inc.|
|Length of Pull||13.5|
|Forend Width||Rear-1.94 Front-1.78|
|Max Barrel Contour||.850 muzzle|