Barrels

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

About half the weight of comparably-sized steel barrels. (Finished weight under 3 lbs.)

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.

NOTE: The Proof Research Carbon Fiber "Sendero" actually measures very close to the standard M24 taper. The Sendero Light is similar in counter to the Rem 700 "Varmint / Sendero" taper barrels.

When PROOF Research® joined with Lawrence Barrels in 2012 they acquired 15 years of experience in manufacturing precision steel barrels. These stainless steel cut-rifled barrels are made in-house with an absolute commitment to extreme accuracy and quality. They start with double stress-relieved 416R stainless steel, a pre-hardened chromium stainless steel ideally suited for use in precision, match-grade rifle barrels. 416R was specifically designed by engineers in collaboration with barrel makers and rifle manufacturers to provide the consistency, high quality and durability the firearms industry demands.

They are shipped ready to be assembled onto your Tikka T3/T3X Rifle by a qualified individual. The barrel will come pre-chambered in the specified caliber, threaded for the receiver and crowned at the muzzle end. 

Carbon fiber has long been hailed across many industries—aerospace, cycling, alternative energy—as a wonder material making everything lighter and stronger. When employed in a rifle barrel the benefits extend beyond reducing weight and increasing strength. Our patented manufacturing process begins with full-profile, match-grade 416R stainless steel barrel blanks that are made in our firearms division. These blanks are then turned down to a significantly reduced profile greatly reducing weight. This reduced contour barrel is then wrapped with high-strength, aerospace-grade carbon fiber impregnated with a proprietary matrix resin developed by our advanced composites division, PROOF Research ACD. The carbon fibers we use have a unique ability to diffuse heat along the length of the barrel (much like fiber optics transmit light). Carbon fiber also moves heat very effectively through the wall (thickness) of the barrel greatly increasing heat transport resulting in barrels that cool faster, maintain accuracy over longer sessions of fire, and live longer. The end result is an aerospace-grade, high-fiber content composite barrel that is stronger, lighter, as accurate as the finest precision steel barrel, and durable to perform in the most demanding environments. They’re not just lighter—they’re better.

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

Less than half the weight of comparably-sized steel barrels. (Finished weight under 2 lbs.)

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.

PROOF Research pre-fit carbon fiber & steel barrels for the Impact Precision 737 are to be installed in a simple operation requiring few specialized tools. These barrels come chambered and threaded for an easy install - torque on, ensure headspace with proper gauges and head to the range!

If your a fan of the CZ 455 & 457 22 LR you’ll be an even bigger fan of the PROOF Research carbon fiber pre-fit barrels.
Our pre-fit CZ carbon fiber barrels are threaded/chambered and ready for an easy install. The CZ 455 & 457 barrels are available in select lengths.

Carbon fiber has long been hailed across many industries—aerospace, cycling, alternative energy—as a wonder material making everything lighter and stronger. When employed in a rifle barrel the benefits extend beyond reducing weight and increasing strength. Our patented manufacturing process begins with full-profile, match-grade 416R stainless steel barrel blanks that are made in our firearms division. These blanks are then turned down to a significantly reduced profile greatly reducing weight. This reduced contour barrel is then wrapped with high-strength, aerospace-grade carbon fiber impregnated with a proprietary matrix resin developed by our advanced composites division, PROOF Research ACD. The carbon fibers we use have a unique ability to diffuse heat along the length of the barrel (much like fiber optics transmit light). Carbon fiber also moves heat very effectively through the wall (thickness) of the barrel greatly increasing heat transport resulting in barrels that cool faster, maintain accuracy over longer sessions of fire, and live longer. The end result is an aerospace-grade, high-fiber content composite barrel that is stronger, lighter, as accurate as the finest precision steel barrel, and durable to perform in the most demanding environments. They’re not just lighter—they’re better.

Carbon fiber has long been hailed across many industries—aerospace, cycling, alternative energy—as a wonder material making everything lighter and stronger. When employed in a rifle barrel the benefits extend beyond reducing weight and increasing strength. Our patented manufacturing process begins with full-profile, match-grade 416R stainless steel barrel blanks that are made in our firearms division. These blanks are then turned down to a significantly reduced profile greatly reducing weight.

Carbon fiber has long been hailed across many industries—aerospace, cycling, alternative energy—as a wonder material making everything lighter and stronger. When employed in a rifle barrel the benefits extend beyond reducing weight and increasing strength. Our patented manufacturing process begins with full-profile, match-grade 416R stainless steel barrel blanks that are made in our firearms division. These blanks are then turned down to a significantly reduced profile greatly reducing weight.

These are a special run that Proof offered that come complete with muzzle brake, adjustable gas block and gas tube.

 THE ONLY CARBON FIBER-WRAPPED BARREL APPROVED FOR USE BY THE U.S. MILITARY.

This patented manufacturing process begins with full-profile, match-grade 416R stainless steel barrel blanks that are made in our firearms division. These blanks are then turned down to a significantly reduced profile greatly reducing weight. This reduced contour barrel is then filament-wrapped with high-strength, aerospace-grade carbon fibers impregnated with a high-thermal conductivity matrix resin developed by our aerospace materials division.

PROOF Research carbon fiber & steel pre-fit barrels for the Terminus Apollo, Zeus and Kratos actions come chambered and threaded for an easy install. Simply torque on, double check & ensure headspace with proper gauges and head to the range! Pre-fit barrels that deliver shot for shot accuracy and performance - there is simply no better choice for the Terminus Apollo, Zeus, and Kratos actions than our carbon fiber & steel pre-fit barrels.

Zeus: Pre-fits will fit actions with the "quick change" option but not the "full length" thread option.

Apollo / Apollo Lite / Ti: Pre-fits will fit all actions with integral recoil lug and actions supplied .250" thick recoil lug.

Kratos / Kratos Lite: Pre-fits will fit all actions with 1 1/16" x 16 receiver threads but not actions with 1.100" x 16 threads.

PROOF Research pre-fit carbon & steel barrels for Zermatt Arms TL3/SR3 actions make it easy to upgrade your rifle or change calibers. Our pre-fit Zermatt Arms shouldered barrels are easy to install. Simply thread it on, torque it down, double check headspace and head for the range.

PROOF Research pre-fit carbon & steel barrels for Zermatt Arms Origin actions make it easy to upgrade your rifle or change calibers. Our pre-fit Zermatt Arms shouldered barrels are easy to install. Simply thread it on, torque it down, double check headspace and head for the range.

PROOF Research pre-fit steel barrels for the Impact Precision 737R are to be installed in a simple operation requiring few specialized tools. These barrels come chambered and threaded for an easy install - torque on, ensure headspace with proper gauges and head to the range! Shot for shot accuracy and performance - there is simply no better choice for the Impact Precision actions than our carbon fiber & steel pre-fit barrels.

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

Less than half the weight of comparably-sized steel barrels. (Finished weight under 3 lbs.)

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.

The JP Enterprises Enhanced Bolts™ are the perfect add-on to your new Proof Research AR Barrel.  The JP Enhanced Bolts™ have become the industry's go-to bolt assembly. Made out of Superior SAE 9310 material, these bolts have an extended life span and resiliency unlike any other bolt on the market today. Stocky's® is carrying a variety of different caliber bolt assemblies. 

As the leading supplier and producer in the world of Ballistic Test barrels as well as the very accurate Pro Series of hunting, target and tactical rifles, H-S Precision knows what it takes to produce a quality barrel. All barrel blanks are 416R Stainless Steel and feature proprietary 6-groove 10-X cut rifling process. Blanks are offered in multiple contours, from a lightweight sporter configuration to a large straight taper, and everything in between. Any common twist rate is available in any contour. They are available in both fluted or non-fluted configurations.

Choose from a lightweight hunting profile all the way up to a heavy tactical profile. These barrels are blanks and will need to be threaded, crowned, and chambered to your specifications. See the full description below for contour specifications.

We have both crowned and threaded barrels in our inventory. If you have a preference please give us a call at 561-584-8500.

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

Less than half the weight of comparably-sized steel barrels. (Finished weight under 3 lbs.)

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.

NOTE: The Proof Research Carbon Fiber "Sendero" actually measures very close to the standard M24 taper.

Your Pre-Fit Savage bolt-action barrel will arrive chambered and threaded in various calibers. We recommend a qualified gunsmith install the pre-fit barrel on your Savage. These barrels are made for the smaller thread size receivers. Feel free to call us to double check which one you have. You can also tell which thread size you have by measuring the barrel nut length. If it is 5/8" long you have the large thread and these barrels will not work but you can still use a bolt action blank and have it threaded and chambered by a gunsmith.  If your barrel nut measures 7/8" long then it would be the smaller thread and these barrels will work. 

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.

Your barrel comes pre-chambered and headspaced in selected cartridges, ready-to-install by a qualified individual.

All AR-10 308 barrels are headspaced for the JP EnhancedBolt™ get yours here. The 260 Rem and 6.5 Creedmoor barrels require the High Pressue EnhancedBolt™ part#JPEB308-HP.

"Bottom line, my Ruger Precision Rifle with Proof Research Barrel is a hammer. The rifle is superbly accurate, it’s consistent at distance, and acts like a custom barrel should. It’s easily an upgrade over the factory barrel and balances the rifle out nicely. So if you want to save a few pounds, experience first class results downrange don’t worry about what the Facebook experts tell you, Carbon Fiber barrels work." - Frank Galli, Snipers Hide

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

Less than half the weight of comparably-sized steel barrels. (Finished weight under 3 lbs.)

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.

They are shipped ready to be assembled onto your Ruger Precision Rifle by a qualified individual. The barrel will come pre-chambered in the specified caliber, threaded for the receiver and threaded at the muzzle for a supressor or brake. 

"PROOF has cracked the code with high-performance carbon-fiber barrels.” - Outdoor Life Magazine

PROOF Research is proving carbon fiber-wrapped barrels aren’t just a lightweight alternative to traditional steel barrels, but that they provide superior performance, including extreme accuracy, unprecedented durability and increased barrel life. By combining our unique manufacturing process with advanced technology composite materials and thermo-mechanical design principles, we’ve accomplished what others have failed to do in the past—match-grade carbon fiber barrels that weigh a fraction of traditional steel barrels while compromising nothing. They’re not just lighter—they’re better.