Bargain Barn

No rust. No dust. NOMAD. Avoid the annoying repercussions of top-down screws with iota NOMAD ZL, a reinvented ring-base combo scope mounting system featuring under-angled screws and ZEROLIGHT technology.

NOMAD ZL gives hunters and shooters the freedom to take the rings off and put them back on their rifle scope tube with ease whenever they need. With no rust and no dust, the NOMAD ZL’s revolutionary under-angled screw design reduces corrosion from the condensation and crud that collects in the sockets of the typical top-down screws seen on other scope rings in the market. And hey, it looks good, too -- By placing the screws on the underside of the ring, we opened up the top to display a smooth, sleek exterior design. To enhance your positioning accuracy and adjustment capabilities when using a scope system during conditions with low visibility, we incorporated our patent pending ZEROLIGHT technology in the rear ring of the NOMAD ZL. The NOMAD ZL is fabricated out of anodized Aluminum 6061-T6, an aircraft-grade aluminum alloy known for its superior strength, lightweight mass and corrosion resistance. Each ring utilizes four stainless steel socket head cap screws to facilitate an equal distribution of force for optimal solidity when mounting your rifle scope.

The NOMAD ZL and NOMAD are available in both 30 mm and 34 mm sizes for Remington 700 and Savage Round applications.

Learn More

Our new HOWA Hunter is a classically-styled Ultra Carbon hand laminated sporting riflestock. Weighing in at just 20-21 ounces (SA) and 22-23 ounces (LA) it is the lightest, handiest classic for the demanding Howa rifleman. These are factory blems and can be mounted as-is or finished to suit by the end user.

Nominal Specs:

O.A.L. 29.5”
L.O.P. 13.5”
Weight @600g
Recoil Reduction via SVL Limbsaver pad

Learn More

Genuine Old World craftsmanship with Stocky's latest innovations in our new and improved thumbhole design and drop-in accuracy.... and they weigh less than many comparable composites! Not only are these literally the finest thumbhole stocks we have ever carried (judge for yourself), but unlike the typical laminated sock, these are fronds are cut, vented and tapered to fit either the 700 Police / Varmint or the 700 Sporter barrels! Weatherby, Montana Rifle, Kreighoff, Benelli, Merkel and Beretta are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's is exclusively bringing them to the American aftermarket. All EuroStocks™ feature full OEM-quality fit and finish, 1" thick SoftKick™ recoil pad.

Learn More

Genuine Old World craftsmanship with Stocky's latest innovations in our new and improved thumbhole design and drop-in accuracy.... and they weigh less than many comparable composites! Not only are these literally the finest thumbhole stocks we have ever carried (judge for yourself), but unlike the typical laminated sock, these are fronds are cut, vented and tapered to fit either the 700 Police / Varmint or the 700 Sporter barrels! Weatherby, Montana Rifle, Kreighoff, Benelli, Merkel and Beretta are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's is exclusively bringing them to the American aftermarket. All EuroStocks™ feature full OEM-quality fit and finish, 1" thick SoftKick™ recoil pad.

Learn More

The LoggerHeadTM Adjustable Cheek Piece hardware is designed to address many shortcomings of other currently offered designs as well as offer some welcome new features.

Learn More

 The new Accublock Lite® was designed so it gives you the same reliable "V" style accuracy of our original block but weighs only 1.5 ounces!

Learn More

Eye catching as well as functional, Keystone Sporting Arms and Stocky's® are happy to bring you these cutting-edge style thumbhole target stocks for the Ruger® 10/22®

This is for the Ruger 10/22 Takedown with the .920 barrel. It is in the Birch finish. 

Learn More

Genuine Old World craftsmanship with Stocky's latest innovations in our new and improved thumbhole design and drop-in accuracy.... and they weigh less than many comparable composites! Not only are these literally the finest thumbhole stocks we have ever carried (judge for yourself), but unlike the typical laminated sock, these are fronds are cut, vented and tapered to fit either the 700 Police / Varmint or the 700 Sporter barrels! Weatherby, Montana Rifle, Kreighoff, Benelli, Merkel and Beretta are a few of the rifles you'll see wearing stocks from this premium shop, and Stocky's is exclusively bringing them to the American aftermarket. All EuroStocks™ feature full OEM-quality fit and finish, 1" thick SoftKick™ recoil pad.

Learn More

All EuroStocks™ feature full OEM-quality fit and finish, stippled laser-engraved checkering on the fore and grip and a nice, 1" thick, vented recoil pad. We supply them complete with our hardened, mil-spec takedown screws, washers and all the allen wrenches to adjust them.

Learn More

Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever.

Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest stockmaking facility in America, took us more than a year to put together but we finally accomplished it. You can be sure our new CF lineup is formulated with the best-of-the-best American Technology, indeed the world, has to offer.

Learn More

Our new HOWA MINI 1500 Hunter is a classically-styled Ultra Carbon hand laminated sporting riflestock. Weighing in at just over a pound (475 g) it is the lightest, handiest classic for the demanding Howa rifleman. These are factory blems and can be mounted as-is or finished to suit by the end user.

Nominal Specs:

O.A.L. 29”
L.O.P. 13.25”
Weight 475 g
Recoil Reduction via SVL Limbsaver pad

Finishes:

Unfinished Carbon - these are literally just about how they came from the mold. Some minor cosmetic spots may remain such as small areas of porosity, tooling marks and carbon fiber burrs. You can use these stocks as they are, touch them up or just scuff and paint, now or down the road.

Hand-crafted with 100% American-made materials in our West Palm Beach, FL facility.

Learn More

This stock is for the Savage 10/12 with the bottom bolt release. It is in the Black finish. It has some minor cosmetic flaws such as scratches to the finish. That is why it is being discounted. 

Learn More

Rifles from 375H&H and up needs a strong and functional platform. The GRS Safari is designed for shooting with open sight or low mounted riflescopes - and specifically with dangerous game hunting in mind. Stocky himself routinely shoots rifles in 375H&H, .416 Rigby, 458 Lott as well as the long range 338 Lapua - so he knows what recoil demands from stocks. These stocks will take it.

The stocks are made from laminated wood, with a 1" Limbsaver recoil pad which dampens the recoil very well. Flush cup slingmounts and quick detachable 3/4" sling loop is delivered with the stock as standard. Learn More

Years of personal civilian and military long range shooting experience lies behind the design of this stock. The GRS Hybrid Stock is a monster, capable of handling the biggest and baddest barreled action you care to sit behind.

The design is derived from the long range stock, with the same grip and SpeedLock system. The butt has a surface specially made for shooting with a bag, this is the preferred method for extended ranges. The forend is 2" longer than the sporter/varmint style stock and has a flat bottom for supporting against bags or rests. The longer forend also provides a better mounting position for bipods and aids in balancing long and heavy barrels. The forend has one quick detachable slingmount (flush cup) and one sling mount for using a Harris style bipod is provided as standard. The stock is predrilled for the VersaPod spigot (installation required). The buttstock also has a QD slingmount (flush cup).

Learn More

The same quality and reliability you have come to expect from our 10/22® barrels are also available for the Charger™ Pistol from Ruger®. Pricing: Same as 10/22® Barrels Rifling: 6 groove, 1 in 16 for .22 lr. a .920 outside diameter, 11° Target Crown 14" - 19 oz. Please check local laws for legality purposes. WARNING: These barrels are to be used on .22 Charger™ Pistols ONLY. Installation of one of these barrels on a 10/22® rifle receiver would constitute a violation of federal law. All N.F.A rules apply. Learn More

This forend is for the Remington 870 20g in Granite Gray

Learn More

The classic Pachmayr XL 1" Recoil Pad. These are a grind to fit pad.

Learn More

Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever. Well under 2 lbs!

Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest carbon fiber stockmaking facility in America, took us more than a year to put together but we finally accomplished it. You can be sure our new CF lineup is formulated with the best-of-the-best American Technology, indeed the world, has to offer.

 This stock is for the Howa 1500/ Weatherby Vanguard in the long action. It is inlet for the M24/Proof Sendero barrel contour. It is in the Strata finish. 

There are some cosmetic issues which is why it is being discounted. 

ALL SALES FINAL. 

Learn More

Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever. Well under 2 lbs!

Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest carbon fiber stockmaking facility in America, took us more than a year to put together but we finally accomplished it. You can be sure our new CF lineup is formulated with the best-of-the-best American Technology, indeed the world, has to offer.

 This stock is for the Howa 1500/ Weatherby Vanguard in the short action. It is inlet for the M24/Proof Sendero barrel contour. It is in the Strata finish. 

There are some cosmetic issues which is why it is being discounted. 

ALL SALES FINAL. 

Learn More

We're now stocking some of the OEM (original equipment from the manufacturer) walnut stocks many modern reproductions use on their new rifles, from an Italian supplier, Minelli. In case you don't know who Minelli is, they make approximately 600,000 stocks per year ranging from the military wood you see here to some of the fanciest wood factory stocks you can imagine for names like Weatherby, Beretta and Krieghoff to name a few. I believe they are the biggest stockmaker in the world.

They'd be great on any rifle, new or old!

• Faithful reproduction of original military stocks
• Built with great attention to detail, especially in the inletting
• Finished with an oil finish, replicating a traditional military stock finish
• Ready for fitment of metal hardware and installation, may require minor fitting

 

This stock has some minor damage to the buttstock. That is why it is being discounted. 

ALL SALES FINAL 

Learn More

Stocky’s renowned VG2 Carbon Fiber stock is lighter and stronger than ever.

 Truly the Next Generation of carbon fiber layup - they are stronger, lighter and more precisely machined than ever before. This, the newest stockmaking facility I am aware of, took us more than a year to put together but we finally accomplished it. These stocks are now 100% made at our West Palm Beach, FL facility.

 These are factory blems and can be mounted as-is or finished to suit by the end user.

Learn More

This version is ergonomically identical to the injection-molded version, the LRC M50. Unlike the previous carbon fiber version we did, this new M50-FG™ ("FG" stands for fiberglass) sports the same high cheekrest as the LRC™ version, slightly lowered at the front for clearing and removing the cartridge bolt safely.

It is constructed of hand-laid layers of premium fiberglass cloth reinforced with a carbon fiber core for superior strength in a lightweight build, and then completed with a unique selection from our variety of molded in color schemes. Despite the rather large size, it still weighs just over 2 lbs. with a hand-fitted Pachmayr Decelerator™ pad.

Learn More

This version is ergonomically identical to the injection-molded version, the LRC M50. Unlike the previous carbon fiber version we did, this new M50-FG™ ("FG" stands for fiberglass) sports the same high cheekrest as the LRC™ version, slightly lowered at the front for clearing and removing the cartridge bolt safely.

It is constructed of hand-laid layers of premium fiberglass cloth reinforced with a carbon fiber core for superior strength in a lightweight build, and then completed with a unique selection from our variety of molded in color schemes. Despite the rather large size, it still weighs just over 2 lbs. with a hand-fitted Pachmayr Decelerator™ pad.

Learn More