Search Results

Upcharge for add on(s) and/or other modifications to the order we discussed.

Price: $1.00

Tired of jamming your thumb into the bottom of the stock to drop your clip? This quality unit extends the release to just the right distance so not to interfere with the sandbags, etc. Easy to follow installation instructions included.

Price: $6.29
Retail: $7.50
You Save: $1.21 (16%)

Mounts a swivel stud on Bell & Carlson 2094/8 A5-Series forend accessory rails.

Price: $14.69
Retail: $19.50
You Save: $4.81 (25%)

These are the parts required to convert your hinged floorplate BDL to a blind magazine ADL model.

Price: $88.35

Choice of Matte Blue, Gloss Blue or Silver

Price: $97.93

Office Use Only - Upgrade UPS charges on an existing order

Price: $1.00

These are the highest quality DM's on the market today - choice of professionals worldwide. Center feed design, fits Remington 700 BDL only.

Price: $300.00
Retail: $595.00
You Save: $295.00 (50%)

This is desirable for stocks with flat forends (i.e. Bell & Carlson #2092, 2096, 2998, 2999) when attaching the popular Harris Bipod.

Price: $31.49
Retail: $49.23
You Save: $17.74 (36%)

Adjustable cheek-pieces have become more and more popular, especially as the objectives on the scopes have grown to 50mm, 56mm, and beyond. In order to get a good cheek weld while keeping the eye in line with the scope a raised cheek-piece has been required. This solves a common problem, Karsten's famous cheekrest can be installed on any standard fixed stock.

Price: $59.99

NOW AVAILABLE WITH OR WITHOUT BOTTOM PORT EXTENSION - Recent H.P. While Labs / mil-spec. approved commercial release of the Short Action Remington 700 / M24 upgraded M5 Mil-Spec Detachable Magazine System for commercial distribution is now in stock, complete wth Accuracy International and/or Accurate-Mag magazines. Introductory Special Bundle: M5 Stealth Assembly, A-M Magazine, Pillars and Screws for one LOW price!

New! Long Action Steath takes AI and Accurate Mag single stack .300 Win & .338 Lapua (non CIP) magazines.

Price: $239.99 $119.99
You Save: $120.00 (50%)

BDL Magazine parts (or to convert your ADL to BDL) - DOES NOT INCLUDE FLOORPLATE.

Price: $59.95

New UPGRADED MODELS AND FINISHES! Shop and compare the values on these tackdrivers - by eliminating the middle men you'll save 25%-50% or more off normal brand-name prices!

Price: $95.70

Pre-machined aluminum pillars solve the difficult problem of bedding Ruger bolt action centerfire rifles.

Price: $14.99
Retail: $14.99
You Save: $0.00 (0%)

NEW, NO CUTTING! Strong, lightweight aluminum sleeves are PRE CUT to Remington 700 factory lengths, provide a rock-solid fit between bottom metal and action to maximize accuracy from your hunting or target rifle.

Price: $14.99
Retail: $19.99
You Save: $5.00 (25%)

Upgrade to Custom Shop quality at potmetal pricing! Shop around, you'll fine the exact same merchandise all over the internet for nearly twice the price. How do we do it? We have gone right straight to the source to bring you these high-quality CNC machined drop-in finished and unfinished replacements for your Remington 700 BDL (also SPS, XPS, XLS, LVSS, Sendaro, etc.). Available in "M4 OEM Tactical" heavy profile, traditional profile, and the heavy duty Oberndorf configurations. Choier steel, stainless steel and aluminum. Special Kit Pricing!

Price: $259.95 $129.97
You Save: $129.98 (50%)

Dresses Up Triggerguard For Modern Efficiency. Very popular with accuracy buffs who tighten guard screws with precise tension.

Price: $9.95

These are the pillars that Savage puts in many of their factory stocks. Rear is notched for the trigger.

Price: $13.99

These are the parts needed to convert your standard Savage bolt action rimfire to our Revolution thumbhole.

Price: $29.99

These are the inexpensive screw-in type studs.

Price: $9.99

BLACKHAWK!'s LOK-DOWN sling swivels are precision machined and assembled to exacting tolerances for maximum performance and quiet carry.  Made entirely in the USA from premium steel, LOK-DOWN swivels utilize a positive locking mechanism designed to keep the swivel attached to your gun until you remove it.

Price: $11.99

Don't Get Caught Short - 1/4" longer than the factory screws for a file-to-length fit when yours won't.

Price: $14.99

Stocky's Bedding Gel was designed to take advantage of the latest technological advancements in epoxy research. It has the best possible advantages built into it for those that want a butter-smooth, no run pillar and bedding epoxy that provides the strongest possible bond to aluminum, wood and fiberglass-composite gunstocks. NEW VOLUME PRICING!

Price: $14.99

Conventional 9/16" drill bits rarely drill true and the holes are often oversize and off-center. Stocky's Perfect Pillar Driller will cut the perfect hole for our 9/16" ribbed pillars, straight and true, due to the included pilot that guides the cutters through the existing takedown screw holes in your wood or wood laminate stock.

Price: $47.95

Ruger 1022 takedown screw you need to hold to hold it all together. Socket head style. Available in O.E.M. slotted heads blued or high quality machined stainless steel with socket head.

Price: $5.76

Upgrade to Custom Shop quality at potmetal pricing! Shop around, you'll fine the exact same merchandise all over the internet for nearly twice the price. How do we do it? We have gone right straight to the source to bring you these high-quality CNC machined OEM drop-in finished replacements for your Winchester Model 70 (post-1964.)

Price: $199.99 $143.97
You Save: $56.02 (28%)

These outstanding drop-clip units drop in to standard Remington 700 BDL-type stocks as well as Manners and Bell & Carlson stocks (short and long action versions) so should come in very handy. Great for drop-in ADL to BDL conversions, hunting, varmint and tactical builds. Machined from solid billet aluminum, 5 and 10 round mags available.

Price: $377.93 $249.99
Retail: $425.00
You Save: $175.01 (41%)