Premier™ Thumbhole Style
This handsome thumbhole design lines your hands, arms and torso with the barrel so you can shoot more accurately and with reduced 'jittering'. The Monte Carlo cheek piece results in straight-line recoil for improved scope alignment and less muzzle jump. The thumbhole has a noticable palm swell for a more comfortable gripping surface. Grip is canted slightly for better trigger control. Includes Pachmayr® Decelerator® recoil pad and Uncle Mikes'® sling swivel studs. Sporter barrels only - note the Ruger is for older tang safety rifles, not Mark IIs. We do not carry inventory of these stocks on hand, always a special order (see Stocky's Take below.)
T111-*Interarms Mark X, Long Action
Fits current model action or short action with magazine area block.
T051-Mauser 98, Long Action
Fits sporter action with taper barrel without adjustable trigger, because of multiple origins of manufacture and variations in actions modifications may be required.
T011-*Remington 700 ADL, Long Action, Blind Magazine
Fits current model and Sportsman 78 action, when replacing factory stocks longer action screws may be required.
T021-*Remington 700 BDL, Long Action
Fits models with hinged floorplate, 700 Safari Grade and Classic with modifications to barrel channel and magazine box area, when replacing factory stocks longer action screws may be required.
T023-*Remington 700 BDL, Long Action, Left Hand
Fits models with hinged floorplate, fits 700 Safari Grade and Classic with modifications to barrel channel and magazine box area, when replacing factory stocks longer action screws may be required.
T261-*Remington 700 BDL/DM, Long Action
Detachable Magazine (DBM) versions.
T031-*Ruger 77 Tang Safety, Long Action
Fits older model, stock can be modified to accept any barrel contour offered by Ruger back on the day. Does not fit the newer 77 Mark II models.
T041-*Winchester Mod 70 Post-64, Long Action
Fits models with hinged floor plate, barrel channel with sight lug requires slight modification, short actions with magazine area block (approximate mfg. 1964 to 1985) will fit also.
Stocky's take: This is the lightest thumbhole stock on the market, averaging a tad over 2 lbs. If you have a 700 long action, you owe it to yourself to check out the H-S Precision Pro-Series 2000 Sporter Thumbhole Stocks - Remington 700 BDL Long Action also, we carry those in stock normally. The straight scoop: In our experience these stocks seem to vary in fit more than Medalists and are kind of rough in the inletting, therefore you must be prepared to make the appropriate adjustments when ordering, but they do have some real advantages so are worth the effort. Sometimes this requires epoxy bedding for best results. Most retailers should not carry them for this reason, we have elected to continue to offer them on a special order basis because our customer base is more gun-savvy and includes many professionals - we do not want to make some suffer because of those that don't want to make the necessary accommodation to mount them correctly.
These stocks tend to arrive a little 'rough around the edges', please do not order one if you are not prepared to make the appropriate adjustments and/or bedding as Premier Thumbholes are not returnable.
Bell & Carlson - Premier Thumbhole(TM) line of stocks are generally pretty clean on the exterior, but the internal inletted areas (barrel channel, magazine well, bottom metal, etc.) are often somewhat rough and usually need some minor work for best overall results. Please plan on doing this, it is considered normal and we do not accept returns for this reason. 
