First 3 Things | Availability | Barrel Channels | Action Measurements | Cartridge Guide
Rem 700 | Ruger 77 | Savage 10/110 | Win 70 | Mausers

You must check for safety, fit and function on every aftermarket stock installed. Safety is the primary consideration! Although we strive to achieve it NEVER assume it will be a perfect fit out of the box. Every individual gun is a law unto itself.

Check out our discussion of Choosing Your Stock once you determine the important information outlined below.

General Discussion
Welcome to the world of custom stocks! We have designed this entire business around promoting the safe use of firearms by enhancing the enjoyment the average person can expect to receive from getting more involved with his or her rifles and shotguns. By making them more comfortable to shoot, more suitable for the intended usage, more accurate and far more attractive we can take this sport out of the black plastic realm it has been stuck in and into a far more friendly and useful era. Everything we sell is designed to be installed in an evening or two at home with very little, if any, difficulty for the average hobbyist.

To this goal, unless otherwise indicated, all of the gunstocks we sell are designed to be a "drop-in fit." It must be noted however that due to the normal variations among models as well as certain tolerances that factories may or may not routinely adhere to, some minor fitting and/or additional parts may be required to achieve the desired results. Like most of us that take immense pride in crafting and owning a truly self-customized firearm, we hope you view this as an enjoyable and often necessary part of the refinement process. Although they are not always necessary and we take great care to achieve a drop in fit out of the box you must be willing to make them if necessary when your new stock arrives. Some of the more common adjustments required are discussed on our Fitting / Bedding page and are included in the box with every stock purchased.

First three things you need to know before you buy or inquire about a new stock:

1. Is it a long or short action?
   If you have a .223, .243, 6mm, .257, .308 or similar length cartridge you most likely have a short action. Conversely, the .25-06, .270, .280, .30-06, 7mm Mag, .300 Mag, .300 RUM, 8mm Mag, .338 Mag, .375 H&H or similar you may have a Long Action rifle. Please refer to the photos and discussion below and be sure to take a minute to measure.
2. How do you unload your magazine? 
   If you cannot remember, be sure it's unloaded, turn your gun over and look. On a bolt action, is there a Detatchable Box/Clip Magazine, Hinged Floorplate or is it 'Blind' (wood underside)? Lever guns and some automatics have tubular magazines, that is the cartridges are held in a tube parrallel to the barrel.
3. What kind of barrel does it have?
   Is it a Featherweight? Standard Sporter? Magnum? Sendaro? Varmint? Police? Bull Barrel? Need to know before stock selection as the width of the forend will vary.

Availability
Not all guns have aftermarket stocks widely available. You might also not be aware that many of the stocks we carry are only carved once or twice per year - if that! It often happens that we, as American consumers, assume a retailer's products are always available in bottomless bins. In this world of mass-produced foreign imports please bear in mind that the gunstocks we sell are more unique than that. They are hand crafted by sportsmen like you right here in the USA. In other words they made to our (or your) order, not stamped out on machines and stockpiled in warehouses. Due to prevailing conditions we do our best to be sure they are the best on the market, but the one you have your sights set on may or may not be available very far into the future. Git 'em while we got 'em!

Not a day goes by we don't get calls to fit many fine yet impossible arms. Let's go over a few things to help make a little sense out of it all. Stocky's concept here is not to outfit every obsolete rifle out there. It is more mainstream than that - it's a place to accessorise your modern firearm with an emphasis on apperance, function and accuracy. It's not only a shooting match any more. You may as well admit it to yourself right now, you care as much as we do that it looks as good as it shoots! (We won't tell anybody.)

Please use the following table as a rule of thumb guide - simply provided for your convenience.
Be sure to double check all model numbers and availibility on the main site because they can and do change.
DON'T FORGET TO USE THE STOCK FINDER ON THE UPPER LEFT SIDE OF EVERY PAGE!

Common Terms & Abbreviations

Action Inlet:
Inletting is a term applied to woodworking that refers to the cut-out that lets something to fit into it. Just as water flows into an inlet in the land, so should a piece of metal, in this case a rifle's barrelled action, fit into the wood or synthetic material being used as a handle with which to operate it. So a stock is inlet for a particular action, action length (referred to simply as "long" and "short" versions), magazine style and barrel weight.

Barrel Channels (in order of thickness, use as a rule-of-thumb guide)
See our Barrel Contours page for more common measurements.

• Featherweight / Mountain / Compact - generally the lightest weight version of a rifle, skinny barrel.
• Sporter - the most common version of most sporting rifles - standard weight barrel.
• FBC - Factory Barrel Channel (generic for one size fits all) fits sporters and magnums. Mags could sometimes use a very light sanding.
• Mag (magnum) - some manufacturers use a slightly heavier barrel (0.03" average) on magnum cartridges.
• Sendaro - fluted barrel on Remington 700 "Sendaros is the same taper as their varmint barrel.
• Varmint - not quite a bull, but getting there; called BBC by the stock makers.
• BBC - Bull Barrel Channel; misnomer - what they mean is the stock is cut for the heaviest barrels available from the factory on a particular model
• Bull Barrel- strictly speaking this is a straight cylinder, usually 1.250" in diameter. Most BBC stocks will take a full bull but you will have to do the fitting.

What you need to know about barrel channels :

1. If you have a featherweight, compact or mountain rifle it will not look too great in a sporter stock. It will not be centered in the barrel channel (see below) Buy a stock that was designed for it. If there are no stocks made for it only option is an FBC with a full length bedding job.
2. When the only option is a sporter barrel channel (i.e. the B&C 2963) it is really easy to fit a magnum. Heavy barrels and custom Palma tapers will not work however.
3. You cannot fit a varmint barrel into any sporter stock we know of unless you are willing to give up the 'flats' on the top of the forend. We do not recommend this.
4. Laminated stocks cut for the FBC are drop-ins for standard cartridges and usually drop-ins (albeit tight) for magnums when the factory concerned used a magnum barrel contour (Remington for example). We would suggest spending spending 10 minutes on the barrel channel with some 100 grit but hey, that's us.
5. Free floated barrels are never centered in the barrel channel. It's not the stock's fault. That is the real reason the factories put those pressure pads in the forend and Savage has been gluing barrels to their stocks. Do a quality bedding job that supports the first 2 inches of barrel and center it yourself.
6. Remington fluted sporters are magnum tapers and take the same stocks.
7. Remington Sendaros are varmint tapers and take the same stocks.

Do not use the model number, serial number, numbers stamped on the box or what your buddy told you to buy your new stock! You must follow the simple instructions or you may make a mistake. If you own a Savage short action you must measure your takedown screw spacing as well.

Mauser bolt action rifles have been produced for over 100 years in a wide variety of calibers, from many manufacturing plants all over the world. Most of these guns have several critical dimensions in common, allowing us to group them as Small Ring, Yugo and Large Ring Mausers.

1. Small Ring Mauser - Receiver measures 1 1/4” on the front receiver ring and 7 5/8” center to center on the trigger guard screws. Fits most models: 93, 94, 95 & 96 rifles and carbines.
2. Large Ring Mauser - Receiver measures 1 3/8” on the front receiver ring and 7 7/8” center to center on the trigger guard screws. Includes most large ring actions as well as the Centurion FN, Parker Hale 1200, and the Santa Barbara. 98 bolt channels must be rasped in.
3. Yugo Mauser - Receiver measures 1 3/8" on the front receiver ring and 7 5/8" center to center on the action screws. Includes M48, M48a & M24 Yugoslavian. Bolt cut will also need to be rasped in.

Note: Minor fitting may be required on Mauser stocks due to the wide variety of Mauser actions available.

	We will typically specify a narrow #1 contour barrel channel as below for all Mausers. This way everyone can use them as most barrels are bigger. Steps, bands and custom tapers must be hand fitted.
	BARREL	A	B	C	D	E	F	WT.
	Contour No. 1 Lightweight Sporter	24"	1.140"	2"	2"	.850"	.550"	2 lbs 11oz